Products of other enterprises
Technical characteristics
- Country of manufactureChina
Description
WG (Polypropylene woven geotextile) is made of polypropylene flat mono filament by weaving into fabrics used for water conservancy, electric power, harbor, highway, railway construction in geotechnical engineering, etc. For example, geotextile tubes.
Item | Unit | Specifications | |||||||||||||||||
WG015 | WG022 | WG028 | WG035 | WG042 | WG056 | WG070 | WG160 | Note | |||||||||||
MD Tensile Strength [ASTM D 4595] | KN/m>= | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 160 | ||||||||||
CD Tensile Strength [ASTM D 4595] | KN/m>= | 15 | 22 | 28 | 35 | 42 | 56 | 70 | 112 | ||||||||||
Tensile Elongation
[ASTM D 4595] |
% > = | 28 | MD/CD Average | ||||||||||||||||
Widths wind age | % | -1.0 | |||||||||||||||||
CBR Puncture Resistance
[ASTM D 6241] |
KN>= | 1.6 | 2.4 | 3.2 | 4.0 | 4.8 | 6.0 | 7.5 | 13.0 | ||||||||||
Pore Size O90(O95)
[ASTM D 4751] |
mm | 0.08-0.5 | |||||||||||||||||
Vertical Permeability
[ASTM D 4491] |
cm/s | K x (10-1-10-3) | K=1.0-99 | ||||||||||||||||
UV Resistance Strength retention [ASTM D 4355] | % > = | 70(500h) | |||||||||||||||||
Tear Strength
[ASTM D 4533] |
KN>= | 0.3 | 0.45 | 0.5 | 0.6 | 0.75 | 1.0 | 1.2 | 1.5 | MD/CD Average | |||||||||
Physical Identification Properties | |||||||||||||||||||
Mass per unit area | g/m2 | 120 | 160 | 200 | 240 | 280 | 340 | 400 | 700 | ||||||||||
warp | % | ± 10 | |||||||||||||||||
Standard Roll Width | m(≥) | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | 5.8 | ||||||||||
Standard Roll Length | m(≥) | 300 | 230 | 180 | 150 | 130 | 100 | 90 | 50 | ||||||||||
Approx. Loading Q'ty Per 40' HQ | Sq.m | 153,120 | 117,392 | 91,872 | 76560 | 66,352 | 51,040 | 45,936 | 25,520 |
Contact the seller
Woven Geotextile
We recommend to see